General and description
Geocpset is a tool for panoramas which contains featureless images, e.g. sky images. In this images a control point detector does not find control points. Geocpset analyses the positions of the images in project files. Then it adds control points to these images which are not connected by control points. The control points are set only be the geometric positions of the images and not by the image content. So geocpset should only used with projects which have assigned rough image positions.
The general usage is
geocpset -o output.pto input.pto
If the --output/-o switch is missing then the suffix "_geo" is added to the filename.
The indented workflow is
- First create project file
pto_gen -o project.pto *.jpg
- Then assign rough positions to images
pto_var --set y=i*20-40,p=0,r=0 -o project.pto project.pto
- Now run a "normal" control point detector, e.g. only on overlapping images
cpfind --prealigned -o project.pto project.pto
- And finally connect all unconnected images
geocpset -o project.pto project.pto
- -o|--output output.pto Output a pto file with the given filename. If not given it will append "_geo" to the input filename.
- -e|--each-overlap By default geocpset adds only control points to unconnected images. With this switch you can force to add a geometric control point to each overlap, which is not connected by control points or linked with image positions.
- --min-overlap=NUM By default geocpset takes only image pairs into account which overlap more than 10 %. If you have very narrow overlaps you can decrease this value to take also such small overlaps into account, e.g. --min-overlap=1
- -h | --help Display help.